How To Build A Fire Pit In Your Backyard

Introduction

Having a fire pit in your backyard is a great way to add warmth and ambiance to your outdoor living space. It's perfect for roasting marshmallows, enjoying a glass of wine or simply relaxing on a chilly evening. Building a fire pit is easier than you might think and can be done in just a few simple steps. In this article, we'll show you how to build a fire pit in your backyard.

Step 1: Choose a Location

The first step in building a fire pit is to choose a location. It's important to select a spot that is away from any flammable materials such as bushes, trees, and buildings. You'll also want to make sure that the location is level and has good drainage. Once you've found the perfect spot, mark it with a stake or spray paint.

Step 2: Gather Materials

The next step is to gather the materials you'll need to build your fire pit. You'll need the following:

• Concrete pavers or bricks
• Sand
• Shovel
• Rake
• Tape measure
• Masonry adhesive

Step 3: Prepare the Site

Now that you've chosen your location and gathered your materials, it's time to prepare the site. Use a shovel to remove any grass, weeds, or debris from the area. Then, use a rake to level the ground and create a smooth surface. If the ground is uneven, you may need to add or remove soil to create a level surface.

Step 4: Lay the First Layer

Once the site is prepared, it's time to start laying the first layer of pavers or bricks. Begin by laying the pavers or bricks in a circle or square shape, depending on the design you've chosen. Use a tape measure to ensure that each paver or brick is evenly spaced. If necessary, cut pavers or bricks to fit using a chisel and hammer.

Step 5: Add Sand and Masonry Adhesive

After you've laid the first layer of pavers or bricks, it's time to add sand and masonry adhesive. Spread a layer of sand over the pavers or bricks, then use a broom to sweep it into the cracks. This will help to stabilize the pavers or bricks. Next, apply a layer of masonry adhesive to the top of the first layer of pavers or bricks. This will help to hold the second layer in place.

Step 6: Lay the Second Layer

Now it's time to lay the second layer of pavers or bricks. Start by placing the first paver or brick on top of the adhesive, making sure it's level with the first layer. Continue laying the pavers or bricks, making sure each one is level and evenly spaced. If necessary, cut pavers or bricks to fit using a chisel and hammer.

Step 7: Finish the Fire Pit

After you've laid the second layer of pavers or bricks, it's time to finish the fire pit. Use a brush to remove any excess sand from the surface of the pavers or bricks. Then, add a layer of gravel or lava rock to the bottom of the fire pit. This will help with drainage and prevent the fire from spreading. Finally, add firewood and enjoy!

Conclusion

Building a fire pit in your backyard is a great way to add warmth and ambiance to your outdoor living space. Follow these simple steps to build your own fire pit and enjoy relaxing evenings by the fire!